本页暂无Chinese版本，以下为英文原文。 查看英文版 →
P0441 P0xxx · 动力总成（P） 低严重度
Evaporative Emission Control System Incorrect Purge Flow
The ECU commanded the purge valve open but the expected change in fuel trims or tank pressure did not occur — a flow problem rather than a leak.
严重程度说明： 低——通常不影响行驶，下次保养时处理即可
你会注意到的故障现象
- Rough idle after refuelling
- Hard starting when hot
- Fuel smell near the engine bay
- Slightly high fuel consumption
常见原因
按可能性从高到低排列——从最上面开始查。
- 1 Stuck-open or stuck-closed purge valve
- 2 Blocked vapour line
- 3 Failed purge solenoid
- 4 Disconnected or cracked hose at the intake
如何排查
先做花钱最少、侵入最小的检查——大多数这类码不是零件问题。
- ✓ Command the purge valve and watch fuel trims and tank pressure respond.
- ✓ Check the hose from the valve to the intake manifold for cracks.
- ✓ Blow through the valve: it should be sealed when de-energised.
- ✓ Smoke-test the whole vapour path if flow is still unexplained.
维修方案
- Replace the purge solenoid
- Clear or replace the blocked hose
- Repair the intake-side connection
P0441 —— 常见问题
Why does the engine stumble after filling up? +
A stuck-open purge valve dumps a rich vapour cloud into the intake right when the tank is full.
Is this a leak or a blockage? +
P0441 usually means flow is wrong, not that vapour is escaping — start with the purge valve, not the cap.