本页暂无Chinese版本，以下为英文原文。 查看英文版 →
P0620 P0xxx · 动力总成（P） 中严重度
Generator Control Circuit Malfunction
The ECU commands the alternator but does not see the expected response — typical on smart-charging systems where the regulator is ECU-controlled.
严重程度说明： 中——已影响行驶或排放，请本周内安排检修
你会注意到的故障现象
- Battery warning lamp
- Flat battery
- Dim lights
- Charging voltage not responding to command
常见原因
按可能性从高到低排列——从最上面开始查。
- 1 Failed alternator regulator
- 2 Open or shorted LIN/PWM control wire
- 3 Slipping or broken drive belt
- 4 Faulty battery current sensor
如何排查
先做花钱最少、侵入最小的检查——大多数这类码不是零件问题。
- ✓ Check belt condition and tension first.
- ✓ Inspect the control wire between ECU and alternator.
- ✓ Command the alternator with a scan tool and watch charging voltage respond.
- ✓ Test the battery and the current sensor on the negative terminal.
维修方案
- Replace the alternator or regulator
- Repair the control wiring
- Replace the belt or battery current sensor
P0620 —— 常见问题
Why does the battery go flat overnight only? +
If charging works when driving, suspect a parasitic drain instead — that is a different test entirely.
Can I fit a standard alternator? +
Not on smart-charging vehicles; the ECU needs to command output or the fault stays.