本页暂无Chinese版本，以下为英文原文。 查看英文版 →
C0300 C0xxx · 底盘（C） 中严重度
Steering / Suspension Actuator Circuit Fault
Fault in an electronically controlled damping or steering actuator. Ride height or steering assist may be stuck at a default.
严重程度说明： 中——已影响行驶或排放，请本周内安排检修
你会注意到的故障现象
- Harsh or soft ride
- Ride height incorrect
- Steering assist inconsistent
- Suspension warning lamp
常见原因
按可能性从高到低排列——从最上面开始查。
- 1 Failed actuator or damper solenoid
- 2 Open wiring
- 3 Corroded connector at the strut
- 4 Control module fault
如何排查
先做花钱最少、侵入最小的检查——大多数这类码不是零件问题。
- ✓ Identify which corner the code points to and check that connector first.
- ✓ Command the actuator with a scan tool and listen for operation.
- ✓ Measure resistance across the actuator coil.
- ✓ Inspect for water ingress at the strut-top connector.
维修方案
- Replace the actuator or damper
- Repair the wiring
- Replace the control module if needed
C0300 —— 常见问题
Can I drive with a failed damper actuator? +
Yes, but handling degrades. On adaptive systems the default is usually firm, which is safe but uncomfortable.
Do I need to recalibrate afterwards? +
On height-adjustable systems, yes — run the level calibration after fitting.