本页暂无Chinese版本，以下为英文原文。 查看英文版 →
C0561 C0xxx · 底盘（C） 中严重度
System Disabled / Calibration Data Not Available
A chassis function is disabled because required calibration data is missing — common after ADAS or steering work.
严重程度说明： 中——已影响行驶或排放，请本周内安排检修
你会注意到的故障现象
- ADAS unavailable
- Lane assist disabled
- ESP or steering warnings
常见原因
按可能性从高到低排列——从最上面开始查。
- 1 Calibration never performed after repair
- 2 Windscreen or camera replaced without recalibration
- 3 Steering angle zero point lost
- 4 Software update cleared learned values
如何排查
先做花钱最少、侵入最小的检查——大多数这类码不是零件问题。
- ✓ Identify which function reports disabled and check its calibration status.
- ✓ Run the static or dynamic calibration procedure with the correct targets.
- ✓ Confirm the camera/radar mounting is to specification before calibrating.
- ✓ Clear codes and road-test.
维修方案
- Perform the required ADAS calibration
- Re-run steering angle zero-point
- Reflash and recalibrate
C0561 —— 常见问题
Can I drive with ADAS disabled? +
Yes — these are assistance functions, not safety-critical brakes. But do not rely on them until recalibrated.
Static or dynamic calibration? +
Depends on the manufacturer. Many require static targets first, then a dynamic road-learn drive.