本页暂无Chinese版本，以下为英文原文。 查看英文版 →
C0550 C0xxx · 底盘（C） 中严重度
ECU / Module Not Configured or Configuration Mismatch
A chassis module has no valid configuration or the vehicle data does not match. Typical after a used-module swap or an interrupted coding session.
严重程度说明： 中——已影响行驶或排放，请本周内安排检修
你会注意到的故障现象
- Module faults and lamps on
- Functions missing or behaving wrongly
- Vehicle options not recognised
常见原因
按可能性从高到低排列——从最上面开始查。
- 1 Replacement module not coded
- 2 Incorrect part number fitted
- 3 Interrupted programming
- 4 Software mismatch
如何排查
先做花钱最少、侵入最小的检查——大多数这类码不是零件问题。
- ✓ Verify the fitted part number matches the vehicle specification.
- ✓ Check whether programming was interrupted (supply voltage during coding matters).
- ✓ Perform the coding/configuration procedure with the correct tooling.
- ✓ Clear codes and run a full system scan afterwards.
维修方案
- Code the module with the correct vehicle data
- Fit the correct part number
- Repeat the programming with a stable power supply
C0550 —— 常见问题
Why does a used module cause this? +
It carries the donor vehicle's configuration. Correct coding is mandatory, not optional.
Is a stable power supply really that important? +
Yes. Voltage dips during coding are the single biggest cause of bricked modules — use a supply unit.