이 페이지는 아직 Korean로 제공되지 않습니다. 영어 원문을 표시합니다. 영문으로 보기 →
U0001 U0xxx · 네트워크 (U) 심각도 높음
High Speed CAN Communication Bus
The high-speed CAN bus is off-line or badly degraded. Multiple modules lose contact at once — which is the clue that tells you it is the bus, not a module.
심각도 안내: 높음 — 즉시 주행을 멈추고 진단하세요. 추가 손상 위험이 있습니다
확인할 수 있는 증상
- Many unrelated warning lamps
- Modules not responding to the scan tool
- No-start or limp mode
주요 원인
가능성이 높은 순서로 정렬되어 있습니다. 위부터 확인하세요.
- 1 CAN-H or CAN-L short to earth, battery or each other
- 2 Open circuit in the bus wiring
- 3 A single module dragging the bus down
- 4 Missing or wrong terminating resistor
점검 방법
비용이 적고 침습적이지 않은 항목부터 — 대부분의 코드는 부품 문제가 아닙니다.
- ✓ Count how many modules are unreachable — more than one means bus, not module.
- ✓ Measure resistance across CAN-H and CAN-L with the battery disconnected: roughly 60 Ω means both terminators are present.
- ✓ Measure CAN-H at ~2.5–3.5 V and CAN-L at ~1.5–2.5 V with the ignition on.
- ✓ Disconnect modules one at a time to find the one that restores the bus.
- ✓ Scope the waveform — a flat line plus one active line tells you which side is shorted.
수리 방법
- Repair the shorted or open bus wiring
- Replace the faulty module that is dragging the bus
- Restore the terminating resistor
U0001 — 자주 묻는 질문
How do I tell a bus fault from a dead module? +
If two or more unrelated modules are unreachable, suspect the bus. A single missing module points at that module's supply or wiring.
Why 60 Ω and not 120 Ω? +
There are two 120 Ω terminating resistors in parallel. Reading 120 Ω means one is missing; 40 Ω suggests a third has been added.