Skip to main content
Diese Seite ist noch nicht auf German verfügbar. Es wird das englische Original angezeigt. Auf Englisch lesen →
U0140 U0xxx · Netzwerk (U) Mittlerer Schweregrad

Lost Communication with Body Control Module

The body module has dropped off the bus, taking lighting, locking, windows and wipers with it in one go.

Hinweis zum Schweregrad: Mittel — Fahrsicherheit oder Emissionen betroffen, diese Woche terminieren

Symptome, die Ihnen auffallen

  • Lights, locks and windows all faulty
  • Wipers not working
  • Multiple body codes

Häufige Ursachen

Von wahrscheinlich bis unwahrscheinlich sortiert — beginnen Sie oben.

  1. 1 BCM power or earth fault
  2. 2 Water ingress (very common)
  3. 3 CAN fault
  4. 4 Failed BCM

Fehlerbehebung

Zuerst das Günstigste und am wenigsten Invasive — die meisten dieser Codes sind kein Teileproblem.

  1. ✓ Check the BCM fuses and earths.
  2. ✓ Inspect for water ingress — under-dash and footwell modules flood.
  3. ✓ Measure CAN at the BCM connector.
  4. ✓ Isolate the BCM to check whether it is dragging the bus.

Reparaturoptionen

  • Repair supply or earth
  • Dry and seal the water ingress
  • Replace and code the BCM

U0140 — häufig gestellte Fragen

Why did everything electrical fail at once? +

They share one module. That clustering is the diagnostic clue — it is a BCM or bus problem, not five separate faults.

Where does the water come from? +

Blocked scuttle drains, a leaking heater matrix or a bad screen seal. Fix the leak or the new module fails too.

Bestätigen Sie die Diagnose, bevor Sie Teile kaufen

Senden Sie uns Code, Freeze-Frame-Daten und Fahrzeug — unsere Ingenieure sagen Ihnen, was Sie zuerst prüfen.