Skip to main content
Diese Seite ist noch nicht auf German verfügbar. Es wird das englische Original angezeigt. Auf Englisch lesen →
P0174 P0xxx · Antrieb (P) Mittlerer Schweregrad

System Too Lean (Bank 2)

Bank 2 fuel trims are strongly positive — the ECU is adding fuel because the mixture is too lean on that side of the engine.

Hinweis zum Schweregrad: Mittel — Fahrsicherheit oder Emissionen betroffen, diese Woche terminieren

Symptome, die Ihnen auffallen

  • Lean misfire under load
  • Hesitation
  • High NOx on emissions test
  • Possible pinging

Häufige Ursachen

Von wahrscheinlich bis unwahrscheinlich sortiert — beginnen Sie oben.

  1. 1 Vacuum leak specific to bank 2
  2. 2 Weak fuel delivery
  3. 3 Contaminated MAF
  4. 4 Exhaust leak before the bank 2 sensor
  5. 5 Low fuel pressure

Fehlerbehebung

Zuerst das Günstigste und am wenigsten Invasive — die meisten dieser Codes sind kein Teileproblem.

  1. ✓ Compare bank 1 and bank 2 trims; a single-bank problem means a local leak or injector.
  2. ✓ Smoke-test the intake manifold on that bank.
  3. ✓ Check fuel pressure under load, not just at idle.
  4. ✓ Look for exhaust leaks before the bank 2 upstream sensor.

Reparaturoptionen

  • Repair the intake leak
  • Replace the fuel pump or filter if pressure is low
  • Repair the exhaust leak
  • Clean the MAF

P0174 — häufig gestellte Fragen

Both banks are lean — now what? +

A shared cause: MAF, fuel pressure, or a large vacuum leak after the throttle body.

Can a misfire cause a lean code? +

Yes — an unburned-charge misfire dumps oxygen into the exhaust and the sensor reads it as lean.

Bestätigen Sie die Diagnose, bevor Sie Teile kaufen

Senden Sie uns Code, Freeze-Frame-Daten und Fahrzeug — unsere Ingenieure sagen Ihnen, was Sie zuerst prüfen.